You cannot place a new order from your country. United States

Specials

Price drop

Showing 1 - 45 of 45 items
  • Педикюрная насадка увеличенных габаритов, СВЕРХ ГРУБАЯ абразивность для скоростной обработки очень плотных, больших по размеру, застарелых и сильно ороговелых участков Первичная обработка очень грубых пяток Интенсивная обработка крупных натоптышей Скоростная обработка больших огрубелостей кожи Изобретено и запатентовано Компания МУЛЬТИБОР™ Дезинфекция...

    Reduced price!
  • "Standard" bit for a final removing of keratinized skin Possible use: On the edge of step cracks treatmentDry corns treatmentThe cracks abrading

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Small roughness “FINISH - Standard” for the final grinding of the foot after caps Red coarse and Green middle Finishing the heels

  • "Finish-Combined" bit for a final steps and heels abrading Possible use: Cracks required delicate treatment

    Reduced price!
  • "Standard-Combined" bit for a basic step's cracks treatment The conical part is for cracks revealing and the lateral cylindrical part is for the rough edge cracks final abrading Possible use: Cracks treatment in hedicure

    Reduced price!
  • 1 Review(s)

    "Turbo" bit for a dense, old corns and sections. Very rough heels primary treatmentFats treatment with powerful machines Possible use: Roughly keratinized skin high-speed treatment

    Reduced price!
  • For the final grinding between toes and completely removing the cracks after 90R and 90G using Possible use: Final abrading between toes The cracks requiring delicate treatment

    Reduced price!
  • "Combined" bit for a high-speed large rough and keratinized surfaces on the same time treatment Possible use: Old corns and cracks intensive treatment

    Reduced price!
  • "Turbo" bit for a fast abrading of the keratinized skin on the steps For precisely and painless treatment Possible use: Dry corns and the toes treatment

    Reduced price!
  • "Standard" bit for a difficult to treat areas between and below toes Possible use: Around toes abrading Corns and rough skin on toes removing

    Reduced price!
  • Bit for final treatment between toes and after 90R and 90G using Possible use: Fine abrading of the heels

    Reduced price!
  • "Standard" bit for pre- abrading below the toes For effectively around the nails griding Possible use: Removal of the skin over growth

    Reduced price!
  • Bit for a difficult to treat areas between and below the toes Excellent result by middle powered machines use Possible use: It gives the excellent possibility to remove the cracks and corns between and below the toes

    Reduced price!
  • "Finish-Standard" bit for a final abrading of the steps after 127R and 127G using Possible use: Fine abrading of the heels

    Reduced price!
  • 1 Review(s)

    "Standard-Intensive" bit for a fast removing of the keratinized skin on " regular treated surfaces" Primary heels treatment Possible use: Rough skin intensive abrading

    Reduced price!
  • Possible use: Removal of a corn callus

    Reduced price!
  • Mandrel for pedicure caps MULTIBOR ™ ∅ 13mm is made of alloy steel. It does not rust, resistant to chemical solutions and to high temperature processing.The following types of sterilization can be used: Autoclaving Dry oven Chemical solutions

    Reduced price!
  • Pedicure sanding caps for a difficult to treat areas between and below the toes Excellent result by middle powered machines use Possible use: It gives the excellent possibility to remove the cracks and corns between and below the toes

    Reduced price!
  • "Standard" pedicure sunding caps for pre- abrading below the toes For effectively around the nails griding Possible use: Removal of the skin over growth

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Small roughness “FINISH - Standard” for the final grinding of the foot after caps Red coarse and Green middle Finishing the heels

    Reduced price!
  • Mandrel for pedicure caps MULTIBOR ™ ∅ 13mm is made of alloy steel. It does not rust, resistant to chemical solutions and to high temperature processing.The following types of sterilization can be used: Autoclaving Dry oven Chemical solutions

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Small roughness “FINISH - Standard” for the final grinding of the foot after caps Red coarse and Green middle Finishing the heels

    Reduced price!
  • Pedicure sanding caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Roughness coarse, “Turbo” type for processing dense, old corns and keratinized areas Fast treatment with powerful machines Possible use: Roughly keratinized skin high-speed treatment

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Small roughness “FINISH - Standard” for the final grinding of the foot after caps Red coarse and Green middle Finishing the heels

    Reduced price!
  • "Standard-Intensive" pedicure sanding caps for a fast removing of the keratinized skin on " regular treated surfaces" Primary heels treatment Possible use: Rough skin intensive abrading

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. The base does not vibrate, does not bend. It gives an opportunity remove corns on the toes treat dry corns on your little fingers or under your fingers effectively sand the skin around the nails remove skin growths Finish ​​ Fine...

    Reduced price!
  • Set of 5 MULTIBOR™ pedicure discs jvery rough abrasive. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! yellow 40 grit Diameter: 23mm Shape: Umbrella

    Reduced price!
  • A set of 5 pcs MULTIBOR™ Pedicure Discs of different abrasiveness. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! yellow 40 grit red 60 grit green 80 grit blue 150 grit beige 180 grit Diameter:...

    Reduced price!
  • Set of 5 MULTIBOR™ pedicure discs coarse abrasive. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! red 60 grit Diameter: 23mm Shape: Umbrella

    Reduced price!
  • Set of 5 MULTIBOR™ pedicure discs medium abrasive. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! green 80 grit Diameter: 23mm Shape: Umbrella

    Reduced price!
  • A set of 5 MULTIBOR™ pedicure discs fine abrasive. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! blue 150 grit Diameter: 23mm Shape: Umbrella

    Reduced price!
  • A set of 5 MULTIBOR™ Pedicure Discs super fine abrasive. The surface has already been coated. The disc shape has a predetermined angle. The master does not need to adapt and keep the desired cutting angle, as in flat discs. The weight of the disc is only 3 grams! beige 180 grit Diameter: 23mm Shape: Umbrella

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. The base does not vibrate, does not bend. High processing speed Primary processing of very rough heels High-speed treatment of large skin roughness Intensive grinding of rough skin Finishing the heels Fine sanding your feet

    Reduced price!
  • C10BM Multibor nail clippers with the smallest cutting part – 5 mm Designed for cutting cuticles C10BM Multibor nail clippers are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling skin being cut

  • C05CM MULTIBOR Nail-clippers for removing ingrown nails Long narrow cutting edges (14-15 mm) give possibility to get to the most hard-to-reach areas to treat a nail C05CM MULTIBOR Nail-clippers for removing ingrown nails are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling...

  • C01BM Multibor nail clippers owing to their optimum length – 15 mm Designed for cutting cuticles C01BM Multibor nail clippers are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling skin being cut

  • C06UM MULTIBOR Multi-Purpose Clippers Viable option for manicure and pedicure. Length of blades is 14-15 mm. Designed for cutting thin nails and cuticles C06UM MULTIBOR Multi-Purpose Clippers are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling skin being cut

  • C03BA Multibor nail clippers with the smallest cutting part – 3 mm Designed for cutting cuticles C03BA Multibor nail clippers are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling skin being cut

  • C02BM Multibor nail clippers owing to their optimum length – 5 mm Designed for cutting cuticles C02BM Multibor nail clippers are made of stainless steel grade which is used for manufacturing surgical tools. They are sharpened perfectly and do not pull or cling skin being cut

  • Pedicure sanding caps for a difficult to treat areas between and below the toes Excellent result by middle powered machines use Possible use: It gives the excellent possibility to remove the cracks and corns between and below the toes

    Reduced price!
  • "Standard" pedicure sunding caps for pre- abrading below the toes For effectively around the nails griding Possible use: Removal of the skin over growth

    Reduced price!
  • Pedicure sanding caps for final treatment between toes and after Red and Green using Possible use: Fine abrading of the heels

    Reduced price!
  • Disposable caps are made of hard plastic. Covered with a layer of durable and very sharp abrasive. Small roughness “FINISH - Standard” for the final grinding of the foot after caps Red coarse and Green middle Finishing the heels

    Reduced price!
Showing 1 - 45 of 45 items